πΈ Physical Equipment: Dual-Mode Smart Controller
β οΈ High-Temp Liquid Sensible Heat Condition
In-pipe system water pressure MUST be maintained at β₯ 5 bar (7-10 bar recommended) to suppress film boiling at 150Β°C output, ensuring highly efficient single-phase liquid heat exchange.
π¦ Steam Chamber Spec Toggle
π οΈ Operating Parameters
β Preheating
β‘ Magneto-Thermal Input Power Capacity
4,000 W
π§ In-Pipe Circulation Flow
4.0 L/min
π‘οΈ Heating Temp Rise Demand (Base 25Β°C)
125 Β°C (Output 150 Β°C)
π Copper Spiral Geometry Recommendations
πΉ Recommended Pipe Dia. (D)
1/2" (12.7mm)
πΉ Recommended Coil Outer Dia. (OD)
Γ 90 mm
πΉ Calculated Total Length (L)
1.15 m
πΉ Winding Turns (Estimated)
4.1 Turns
* Note: Length calculation is based on the Log Mean Temperature Difference (LMTD) optimized value between 180Β°C steam and high-pressure water.
π Total Sensible Power Demand
-- kW
β±οΈ Preheat Time Remaining
-- sec
πΏ High-Temp Output Endurance
0 sec
π Energy Level
0 %
π Steam Battery Energy Level Monitor (180Β°C / 10 bar Base)
Magneto-Thermal Storing (Sensible + Latent)
0 J
π€
Gemini High-Temp Thermodynamic Assistant
Providing professional diagnostics for 150Β°C mold temp and industrial high-pressure water loops.